1.Easy to install.Wireless between monitor and main unit, camera is connected to the main box.
2.Low illumination camera with wide angle
3.PAL/NTSC modes available
4.Shock Vibration and water proof camera, you can see the obstacle even in night.
5.Can match with different cameras
6.It can tell the obstacle distance by sensors and show on 3.5¡°TFT monitor.
7.Display the optical videos by the camera euipped in car back.
Specifications:
(1) Display specification:
TFT display(3.5" )
Show format:4:3
Voltage/Power: DC12 ¡À3V / ¡Ü1W
AV: Video & audio inputs
System:PAL/NTSC auto-switching
Contrast:400:1
Resolution: 320X240
(2) Camera specification
Image device:1/4" CMO OV7950
TV system: TNSC/PAL
Effective pixels: 656x492 pixels/628x586 pixels
Voltage/Power: DC12 ¡À3V / ¡Ü0.5W
Vision angle: Level 170¡ã£¬vertical plane 130¡ã
Vedio output: RCA connector, 1.0vp-p/75(ohm)
Night Vision range: 5m
Operating temperature: -20¡ã ~ 70¡ã
Components:
1 pc TFT display
1pc Camera
1 Wiring harness
1pc wireless transmitter (only for WRV-168)
1 pc wireless receiver(only for WRV-168)
1 power wire
1 pc hole saw
Important notice:
1.The unit is for vehicles with 12VDC only.
2.Unit should be installed by professioal auto technician.
3.test the un
it after finishing installation.
4.Wire joints should be insulated.
